Titanium Elbows
Titanium Elbows Manufacturer
Young Things Titanium manufactures titanium elbows for directional changes in industrial piping systems. Elbow geometry and end preparation are produced to the agreed specification or drawing.
- Types: 45 degree, 90 degree and 180 degree elbows
- Typical specifications: ASTM B363; ASME B16.9 dimensions where applicable; other requirements by drawing or purchase specification
- Grades: Grades 1, 2, 3, 4, 5 (Ti-6Al-4V), 7, 9, 11 and 12
- Applications: Chemical processing, fuel systems, reactors, process piping and hydraulic systems
- Surface options: Pickled, polished, sandblasted, anodized or as specified
- Packaging: Identified and protected for transport according to order requirements
For correct selection, specify the angle, nominal size, wall thickness or schedule, center-to-end dimension, end preparation and required inspection documentation.
Ordering Information
For a project-specific quote, please provide the product type, grade, applicable standard, dimensions, quantity, inspection or documentation requirements, and delivery destination. Contact Us to discuss your requirements.
| NPS | O.D. D | Elbow Center-to-End B | 3D Elbow Center-to-End B |
|---|---|---|---|
| 1/2 | 21.3 | 16 | – |
| 3/4 | 26.7 | 19 | 24 |
| 1 | 33.4 | 22 | 31 |
| 1¼ | 42.2 | 25 | 39 |
| 1½ | 48.3 | 29 | 47 |
| 2 | 60.3 | 35 | 63 |
| 2½ | 73 | 44 | 79 |
| 3 | 88.9 | 51 | 95 |
| 4 | 114.3 | 64 | 127 |
| 3½ | 101.6 | 57 | 111 |
| 5 | 141.3 | 79 | 157 |
| 6 | 168.3 | 95 | 189 |
| 8 | 219.1 | 127 | 252 |
| 10 | 273 | 159 | 316 |
| 12 | 323.8 | 190 | 378 |
| 14 | 355.6 | 222 | 441 |
| 16 | 406.4 | 254 | 505 |
| 18 | 457 | 286 | 568 |
| 20 | 508 | 318 | 632 |
| 22 | 559 | 343 | 694 |
| 24 | 610 | 381 | 757 |
| 26 | 660 | 406 | 821 |
| 28 | 711 | 438 | 883 |
| 30 | 762 | 470 | 964 |
| 32 | 813 | 502 | 1010 |
| 34 | 864 | 533 | 1073 |
| 36 | 914 | 565 | 1135 |
| 38 | 965 | 600 | 1200 |
| 40 | 1016 | 632 | 1264 |
| 42 | 1067 | 660 | 1326 |
| 44 | 1118 | 695 | 1389 |
| 46 | 1168 | 727 | 1453 |
| 48 | 1219 | 759 | 1516 |
| Nominal Pipe Size | Outside Diameter at Bevel (D) | Inside Diameter at End | Center to End LR (A/B) | Center to End 3D (A/B) | Wall Thickness (t) |
|---|---|---|---|---|---|
| 1/2 to 2.1/2 | + 1.6 – 0.8 | 0.8 | 2 | 3 | Not less than 87.5% of Nominal Wall Thickness |
| 3 to 3.1/2 | 1.6 | 1.6 | 2 | 3 | |
| 4 | 1.6 | 1.6 | 2 | 3 | |
| 5 to 8 | + 2.4 – 1.6 | 1.6 | 2 | 3 | |
| 10 to 18 | + 4 – 3.2 | 3.2 | 2 | 3 | |
| 20 to 24 | + 6.4 – 4.8 | 4.8 | 2 | 3 | |
| 26 to 30 | + 6.4 – 4.8 | + 6.4 – 4.8 | 3 | 6 | |
| 32 to 48 | + 6.4 – 4.8 | + 6.4 – 4.8 | 5 | 6 |
| NPS | O.D.D | Center-to-End A | 3D Center-to-End A |
|---|---|---|---|
| 1/2 | 21.3 | 38 | – |
| 3/4 | 26.7 | 38 | 57 |
| 1 | 33.4 | 38 | 76 |
| 1¼ | 42.2 | 48 | 95 |
| 1½ | 48.3 | 57 | 114 |
| 2 | 60.3 | 76 | 152 |
| 2½ | 73 | 95 | 190 |
| 3 | 88.9 | 114 | 229 |
| 3½ | 101.6 | 133 | 267 |
| 4 | 114.3 | 152 | 305 |
| 5 | 141.3 | 190 | 381 |
| 6 | 168.3 | 229 | 457 |
| 8 | 219.1 | 305 | 610 |
| 10 | 273 | 381 | 762 |
| 12 | 323.8 | 457 | 914 |
| 14 | 355.6 | 533 | 1067 |
| 16 | 406.4 | 610 | 1219 |
| 18 | 457 | 686 | 1372 |
| 20 | 508 | 762 | 1524 |
| 22 | 559 | 838 | 1676 |
| 24 | 610 | 914 | 1829 |
| 26 | 660 | 991 | 1981 |
| 28 | 711 | 1067 | 2134 |
| 30 | 762 | 1143 | 2286 |
| 32 | 813 | 1219 | 2438 |
| 34 | 864 | 1295 | 2591 |
| 36 | 914 | 1372 | 2743 |
| 38 | 965 | 1448 | 2896 |
| 40 | 1016 | 1524 | 3048 |
| 42 | 1067 | 1600 | 3200 |
| 44 | 1118 | 1676 | 3353 |
| 46 | 1168 | 1753 | 3505 |
| 48 | 1219 | 1829 | 3658 |
| Nominal Pipe Size | Outside Diameter at Bevel (D) | Inside Diameter at End | Center to End LR (A/B) | Center to End 3D (A/B) | Wall Thickness (t) |
|---|---|---|---|---|---|
| 1/2 to 2.1/2 | + 1.6 – 0.8 | 0.8 | 2 | 3 | Not less than 87.5% of Nominal Wall Thickness |
| 3 to 3.1/2 | 1.6 | 1.6 | 2 | 3 | |
| 4 | 1.6 | 1.6 | 2 | 3 | |
| 5 to 8 | + 2.4 – 1.6 | 1.6 | 2 | 3 | |
| 10 to 18 | + 4 – 3.2 | 3.2 | 2 | 3 | |
| 20 to 24 | + 6.4 – 4.8 | 4.8 | 2 | 3 | |
| 26 to 30 | + 6.4 – 4.8 | + 6.4 – 4.8 | 3 | 6 | |
| 32 to 48 | + 6.4 – 4.8 | + 6.4 – 4.8 | 5 | 6 |
| NPS | O.D.D | Center to Center O | Back to Face K |
|---|---|---|---|
| 1/2 | 21.3 | NA | NA |
| 3/4 | 26.7 | NA | NA |
| 1 | 33.4 | 51 | 41 |
| 1.1/4 | 42.2 | 64 | 52 |
| 1.1/2 | 48.3 | 76 | 62 |
| 2 | 60.3 | 102 | 81 |
| 2.1/2 | 73 | 127 | 100 |
| 3 | 88.9 | 152 | 121 |
| 3.1/2 | 101.6 | 178 | 140 |
| 4 | 114.3 | 203 | 159 |
| 5 | 141.3 | 254 | 197 |
| 6 | 168.3 | 305 | 237 |
| 8 | 219.1 | 406 | 313 |
| 10 | 273 | 508 | 391 |
| 12 | 323.8 | 610 | 467 |
| 14 | 355.6 | 711 | 533 |
| 16 | 406.4 | 813 | 610 |
| 18 | 457 | 914 | 686 |
| 20 | 508 | 1016 | 762 |
| 22 | 559 | 1118 | 838 |
| 24 | 610 | 1219 | 914 |
| Nominal Pipe Size | Outside Diameter at Bevel (D) | Inside Diameter at End | Center to End LR (A/B) | Center to End 3D (A/B) | Wall Thickness (t) |
|---|---|---|---|---|---|
| 1/2 to 2.1/2 | + 1.6 – 0.8 | 0.8 | 2 | 3 | Not less than 87.5% of Nominal Wall Thickness |
| 3 to 3.1/2 | 1.6 | 1.6 | 2 | 3 | |
| 4 | 1.6 | 1.6 | 2 | 3 | |
| 5 to 8 | + 2.4 – 1.6 | 1.6 | 2 | 3 | |
| 10 to 18 | + 4 – 3.2 | 3.2 | 2 | 3 | |
| 20 to 24 | + 6.4 – 4.8 | 4.8 | 2 | 3 | |
| 26 to 30 | + 6.4 – 4.8 | + 6.4 – 4.8 | 3 | 6 | |
| 32 to 48 | + 6.4 – 4.8 | + 6.4 – 4.8 | 5 | 6 |
| NPS | O.D. D | Center to Center O | Back to Face K |
|---|---|---|---|
| 1/2 | 21.3 | NA | NA |
| 3/4 | 26.7 | NA | NA |
| 1 | 33.4 | 51 | 41 |
| 1.1/4 | 42.2 | 64 | 52 |
| 1.1/2 | 48.3 | 76 | 62 |
| 2 | 60.3 | 102 | 81 |
| 2.1/2 | 73 | 127 | 100 |
| 3 | 88.9 | 152 | 121 |
| 3.1/2 | 101.6 | 178 | 140 |
| 4 | 114.3 | 203 | 159 |
| 5 | 141.3 | 254 | 197 |
| 6 | 168.3 | 305 | 237 |
| 8 | 219.1 | 406 | 313 |
| 10 | 273 | 508 | 391 |
| 12 | 323.8 | 610 | 467 |
| 14 | 355.6 | 711 | 533 |
| 16 | 406.4 | 813 | 610 |
| 18 | 457 | 914 | 686 |
| 20 | 508 | 1016 | 762 |
| 22 | 559 | 1118 | 838 |
| 24 | 610 | 1219 | 914 |
| Nominal Pipe Size | Outside Diameter at Bevel （D） | Inside Diameter at End | cte (A) | Wall Thickness (t) |
|---|---|---|---|---|
| 1/2 to 2.1/2 | + 1.6 – 0.8 | 0.8 | 2 | Not less than 87.5% of Nominal Wall Thickness |
| 3 to 3.1/2 | 1.6 | 1.6 | 2 | |
| 4 | 1.6 | 1.6 | 2 | |
| 5 to 8 | + 2.4 – 1.6 | 1.6 | 2 | |
| 10 to 18 | + 4 – 3.2 | 3.2 | 2 | |
| 20 to 24 | +6.4-4.8 | 4.8 | 2 | |
| 26 to 30 | +6.4-4.8 | +6.4 -4.8 | 3 | |
| 32 to 48 | +6.4-4.8 | +6.4 -4.8 | 5 |
| NPS | O.D.D | Center to Center O | Back to Face K |
|---|---|---|---|
| 1/2 | 21.3 | 76 | 48 |
| 3/4 | 26.7 | 76 | 51 |
| 1 | 33.4 | 76 | 56 |
| 1.1/4 | 42.2 | 95 | 70 |
| 1.1/2 | 48.3 | 114 | 83 |
| 2 | 60.3 | 152 | 106 |
| 2.1/2 | 73 | 190 | 132 |
| 3 | 88.9 | 229 | 159 |
| 3.1/2 | 101.6 | 267 | 184 |
| 4 | 114.3 | 305 | 210 |
| 5 | 141.3 | 381 | 262 |
| 6 | 168.3 | 457 | 313 |
| 8 | 219.1 | 610 | 414 |
| 10 | 273 | 762 | 518 |
| 12 | 323.8 | 914 | 619 |
| 14 | 355.6 | 1067 | 711 |
| 16 | 406.4 | 1219 | 813 |
| 18 | 457 | 1372 | 914 |
| 20 | 508 | 1524 | 1016 |
| 22 | 559 | 1676 | 1118 |
| 24 | 610 | 1829 | 1219 |
| Nominal Pipe Size | Outside Diameter at Bevel (D) | Inside Diameter at End | Center to End LR (A/B) | Center to End 3D (A/B) | Wall Thickness (t) |
|---|---|---|---|---|---|
| 1/2 to 2.1/2 | + 1.6 – 0.8 | 0.8 | 2 | 3 | Not less than 87.5% of Nominal Wall Thickness |
| o 3.1/2 | 1.6 | 1.6 | 2 | 3 | |
| 4 | 1.6 | 1.6 | 2 | 3 | |
| 5 to 8 | + 2.4 – 1.6 | 1.6 | 2 | 3 | |
| 10 to 18 | + 4 – 3.2 | 3.2 | 2 | 3 | |
| 20 to 24 | + 6.4 – 4.8 | 4.8 | 2 | 3 | |
| 26 to 30 | + 6.4 – 4.8 | + 6.4 – 4.8 | 3 | 6 | |
| 32 to 48 | + 6.4 – 4.8 | + 6.4 – 4.8 | 5 | 6 |
Frequently Asked Questions
In addition to standard products, we offer a range of additional processing services to meet customers' specific needs. These services include cutting, drilling, bending, and welding. We have advanced equipment and a professional technical team to ensure high-quality custom processing services that cater to various application requirements.
Yes, our products have obtained several international certifications, including ISO 9001 Quality Management System Certification, NORSOK M-650 Certification, CE Certification, and CNAS Certification. We can also conduct third-party testing and certification based on customer requirements to ensure our products meet the quality and performance standards of the global market.
Yes, every batch of our products undergoes strict quality inspection before leaving the factory. We provide detailed product inspection reports, including chemical composition analysis and mechanical performance testing. The reports ensure that our products meet customer requirements and international standards, providing quality assurance to our customers.
Yes, our titanium and titanium alloy products comply with international environmental standards. During production, we strictly adhere to environmental regulations to minimize environmental impact. We are committed to sustainable development, ensuring that our products and manufacturing processes are environmentally friendly.
We use advanced production management systems to manage production schedules. These systems track production progress in real-time, optimize resource allocation, and ensure that every order is completed on time. Additionally, we regularly review and adjust production plans to optimize processes and meet customer delivery requirements.
Yes, we provide comprehensive technical support and after-sales service. Our experienced staff can offer technical support and guidance on the correct use, installation, and maintenance of our titanium products, ensuring that customers can fully benefit from our products. After-sales service includes handling product quality issues and providing technical consultations.
If your goods are damaged during transportation, please contact our customer service team immediately and provide photos and relevant documents of the damage. We will assist you with the claims process according to our insurance policy and the specific situation, ensuring your rights are protected.
We understand that customers may have urgent shipping needs during holidays or outside of working hours. Our customer service team and logistics partners will make every effort to arrange shipping to meet your time requirements. Please inform us of your special needs in advance so that we can better coordinate and arrange the shipment.
